Sable Brown Rocker Recliner with Massage and Heat - Baylor
La-Z-Boy Sable Brown Rocker Recliner with Massage and Heat - Baylor
|Shipping: Not Available|
Free Store Pickup:
Sold out in your area
Talent runs in the Baylor family and this sable brown rocker recliner from RC Willey is no exception.Besides being able to do the obvious - rock and recline - it does so just inches from a wall. Plus, it even has the ability to give a heated back massage and looks great with its structured arms.
The seat features four 8-gauge seat springs with rear helical springs and two 12-gauge cross brace wires. Dimpled rear swing anchors are used to extend the travel and ride of the springs. An insulator/stabilizer spring support system, a deck pad, and a nonwoven spring cover are integrated into the seat cushion assembly. The back uses two 12-gauge springs. The rocker spring uses La-Z-Boy's standard 8-gauge dual spring and must pass the minimum half million cycle test.
The frame consists of kiln-dried hardwood, furniture grade laminates or engineered framing material, or a combination of these products. Frame joints are mortise and tenon or lap-jointed and glued; stress points are reinforced with corner blocks. Rocker recliner includes A-grade construction consisting of precision-profiled hardwood that is double-doweled, glued and reinforced with screws into the body side.
The rear section of the deep seat depth original bucket chaise seat contains a 3 1/2" contour cut polyurethane foam core laminated with two 3" polyurethane foam upper fillers and two 2" polyurethane foam lower fillers. The front section of the chaise seat contains a 3 1/2" contour cut polyurethane foam core. The chaise pad contains a 1 3/4" polyurethane foam core laminated with a layer of bonded polyester batting wrap and extends from the front of the seat to the top of the legrest. The semi-attached upper back contains a 4 1/2" contour cut polyurethane foam core. The lower back contains a 4" contour cut polyurethane foam core laminated with a 1" lower filler and wrapped with a layer of polyester batting. The arms contain a 3" contour cut polyurethane foam core and a 3" layer of rear arm polyurethane foam. The front post is padded with a 1/2" layer of polyurethane foam. The front arm is padded with a 1 1/2" layer of polyurethane foam. The inside arm, outside arm, and front post are sewn together.
La-Z-Boy mechanical parts are tested to surpass 100,000 cycles, which equals 50 years of normal use. Each Reclina-Rocker features customized reclining comfort which accommodates the size and weight of each user with the turn of a special, easy-to-reach wing-nut. Mechanisms are engineered and manufactured in-house by La-Z-Boy.
- 2-Temperature Heat
- 2-Motor / 3-Speed Massage
- Handwand Heat and Massage Controller
- Polyurethane Foam Back
- Deep Seat Bucket Chaise Seat and Footrest
|Dimensions||37"W x 39"D x 43"H|
|Shipping Weight||90 lbs.|
|Care Instructions||Clean with Water-Based Shampoo or Cleaner|
|Inside Seat Dimensions||22"W x 22"D x 20"H|
|Wall Proximity To Allow Full Recline||13.5 inches|
|Dimensions When Fully Reclined (Headrest to Footrest)||72 inches|
|Weight Capacity||Tested to 300 lbs.|
|Country of Origin||USA|
- 8G Dual Springs with Limited Lifetime Parts & 1-Year Labor Warranty
- Hardwood Frame with Limited Lifetime Parts & 1-Year Labor Warranty
- Polyurethane Foam Cushion with 1-Year Parts & Labor Warranty
- Fabric with 1-Year Parts & Labor Warranty
- La-Z-Boy Mechanism with Limited Lifetime Parts & 1-Year Labor Warranty
- Electronics with 3-Year Parts & 1-Year Labor Warranty