Denim Blue Rocker Recliner with Massage and Heat - Baylor
Out Of Stock
Springs
The seat features four 8-gauge seat springs with rear helical springs and two 12-gauge cross brace wires. Dimpled rear swing anchors are used to extend the travel and ride of the springs. An insulator/stabilizer spring support system, a deck pad, and a nonwoven spring cover are integrated into the seat cushion assembly. The back uses two 12-gauge springs. The rocker spring uses La-Z-Boy's standard 8-gauge dual spring and must pass the minimum half million cycle test.
Frame
The frame consists of kiln-dried hardwood, furniture grade laminates or engineered framing material, or a combination of these products. Frame joints are mortise and tenon or lap-jointed and glued; stress points are reinforced with corner blocks. Rocker recliner includes A-grade construction consisting of precision-profiled hardwood that is double-doweled, glued and reinforced with screws into the body side.
Cushion
The rear section of the deep seat depth original bucket chaise seat contains a 3 1/2" contour cut polyurethane foam core laminated with two 3" polyurethane foam upper fillers and two 2" polyurethane foam lower fillers. The front section of the chaise seat contains a 3 1/2" contour cut polyurethane foam core. The chaise pad contains a 1 3/4" polyurethane foam core laminated with a layer of bonded polyester batting wrap and extends from the front of the seat to the top of the legrest. The semi-attached upper back contains a 4 1/2" contour cut polyurethane foam core. The lower back contains a 4" contour cut polyurethane foam core laminated with a 1" lower filler and wrapped with a layer of polyester batting. The arms contain a 3" contour cut polyurethane foam core and a 3" layer of rear arm polyurethane foam. The front post is padded with a 1/2" layer of polyurethane foam. The front arm is padded with a 1 1/2" layer of polyurethane foam. The inside arm, outside arm, and front post are sewn together.
Mechanism
La-Z-Boy mechanical parts are tested to surpass 100,000 cycles, which equals 50 years of normal use. Each Reclina-Rocker features customized reclining comfort which accommodates the size and weight of each user with the turn of a special, easy-to-reach wing-nut. Mechanisms are engineered and manufactured in-house by La-Z-Boy.
- 2-Temperature Heat
- 2-Motor / 3-Speed Massage
- Handwand Heat and Massage Controller
- Polyurethane Foam Back
- Deep Seat Bucket Chaise Seat and Footrest
| Collection | Baylor |
|---|---|
| Model | 1M-729/D160686 |
| Weight | 90 lbs. |
| Finish | Denim Blue |
| Fabric | 100% Polyester |
| Care Instructions | Clean with Water-Based Shampoo or Cleaner |
| Inside Seat Dimensions | 22"W x 22"D x 20"H |
| Wall Proximity To Allow Full Recline | 13.5 inches |
| Dimensions When Fully Reclined (Headrest to Footrest) | 72 inches |
| Weight Capacity | Tested to 300 lbs. |
| Country of Origin | USA |
| Clean Code | W W-clean W/water Based Shampoo Or Cleaner |
Manufacturer Warranties
- 8G Dual Springs with Limited Lifetime Parts and 1-Year Labor Warranty
- Hardwood Frame with Limited Lifetime Parts and 1-Year Labor Warranty
- Polyurethane Foam Cushion with 1-Year Parts and Labor Warranty
- Fabric with 1-Year Parts and Labor Warranty
- La-Z-Boy Mechanism with Limited Lifetime Parts and 1-Year Labor Warranty
- Electronics with 3-Year Parts and 1-Year Labor Warranty
Sign Up For Emails and SMS Texts
Be the first to know about new products, special offers, sales, deals, and so much more!
Privacy Notification
