Gray Reclina-Rocker Recliner - Crandell - 79999
Gray Reclina-Rocker Recliner - Crandell
La-Z-Boy 10-433/C152553/RECL SKU: 110797043
79999 Only In Stores
Warning! Available in Utah and Las Vegas Stores Only
When it comes to comfort, the Crandell gray Reclina-Rocker® recliner from RC Willey doesn’t mess around. Just look at its deep cushions and generous proportions. Not to mention that, in addition to rocking, you can recline your back and legs independently of each other or together. Now this is how relaxing is done.
- Tall Base
- Generous Seating
- Elongated Handle
- Extension Legrest
- Higher density polyurethane foam for increased support
The SEAT features five 8 1/2-gauge seat springs with rear helical springs and two 12-gauge cross brace wires. An insulator/stabilizer spring support system, a deck pad and a nonwoven spring cover are integrated into the seat cushion for exceptional support. The BACK uses one 12-gauge and two 10-gauge springs with a spring cover. The ROCKER SPRING uses La-Z-Boy's heavy-duty 7 1/2-gauge dual springs with restrictive pin and must pass the minimum half million cycle test.
Frames consist of kiln-dried hardwood, furniture grade laminates or engineered framing material, or a combination of the products. Frame joins are mortis and tenon or lap-jointed and glued; stress points are reinforced with corner blocks.
The deep SEAT-depth cushion contains a 2 3/4" contour cut polyurethane foam core and a 1 1/2" layer of polyurethane foam laminated with a layer of bonded polyester batting. The upper, middle and lower BACK pillows each contain an inner bag filled with blown fiber. The ARMS consist of a 4 1/2" contour cut polyurethane foam core. Each arm is sewn as one complete piece. The LEGREST contains a 3/4" polyurethane foam core with a 1/2" polyurethane foam wrap and a 1 1/2" layer of polyurethane foam. The chair comes with an extension legrest and elongated comfort selector.
Mechanical parts are tested to surpass 100,000 cycles, which equals 50 years of normal use. Features customized reclining comfort which accommodates the size and weight of each user with the turn of a special, easy-to-reach wing-nut. Easy-acting comfort selector to choose among three legrest setting. Mechanism are manufactured in-house by La-Z-Boy.
- Special Order Customization Available
|Dimensions||46"W x 40"D x 46"H|
|Shipping Weight||119 lbs.|
|Inside Seat Dimensions||22.5"W x 23.5"D x 21.5"H|
|Wall Proximity To Allow Full Recline||13 inches|
|Dimensions When Fully Reclined (Headrest to Footrest)||74 inches|
|Weight Capacity||300 lbs.|
|Country of Origin||USA|
|Care Instructions||Clean with water-free dry cleaning solvent|
Warranties & Add-Ons
- Springs with Limited Lifetime Parts & 1-Year Labor Warranty
- Frame with Limited Lifetime Parts & 1-Year Labor Warranty
- Cushion with 1-Year Parts & Labor Warranty
- Fabric with 1-Year Parts & Labor Warranty
- Mechanism with Limited Lifetime Parts & 1-Year Labor Warranty