Cream and Black High Leg Recliner - Thorne - 74999
Cream and Black High Leg Recliner - Thorne
La-Z-Boy 29-492/G151550/FN021 SKU: 110797914
74999 Only In Stores
Warning! Available in Utah and Las Vegas Stores Only
Now at RC Willey, this cream and black high leg recliner was inspired by the wingback chair. The Thorne takes a traditional style and makes it its own. Sans wings. This high-leg recliner flaunts a handsome button-tufted back, simple, flared, rolled arms and tapered legs. And it gets along with all sorts of furniture groupings.
- Button-Tufted Back
- Decorative Wood Legs
- Welt Trim
- Padded Outside Arms and Back
- Performance Plush HR foam Seat cushion, Loose Seat
The SEAT features four 8-gauge seat springs with rear swing anchors, two 12-gauge cross brace wires and a deck pad. The BACK uses two 12-gauge springs and a spring cover.
Frames consist of kiln-dried hardwood, furniture grade laminated or engineered framing material, or a combination of these products. Frame joints are double doweled or lap-jointed and glued; stress points are reinforced with corner blocks. Arm frame is reinforced with customer designed metal bracket and reinforced with a 2 1/2" glue block to provide maximum stability and strength.
The loose SEAT cushion contains a " contour cut polurethane foam core laminated with a 1" layer of polyurethane foam and laminated with a layer of bonded polyester batting wrap. The seat cushion fits under the inside back. The tight BACK contains a 3" contour cut polyurethane foam core laminated with a 2" layer of polyurethane foam, laminated with a 3" layer of polyurethane foam and laminated with a layer of bonded polyester batting wrap. The outside back is padded with a 3/*' layer of polyurethane foam. The ARMS are padded with a 2" contour cut polyurethane foam core and wrapped with a 1/2" layer of polyurethane foam. The outside arm is padded with a 3/8" layer of polyurethane foam pad. The inside arm and front post are sewn together. The LEGREST contains a 3/4" polyurethane foam core, a 1/2" layer of polyurethane foam and wrapped with a 1/2" layer of polyurethane foam. The FOOTREST contains a 1/2" polyurethane foam core and wrapped with a 1/2" layer of polyurethane foam.
The High Leg Lounger chair utilizes an easy-to-operate non-handle, 3 way mechanism. The reclining fixture is attached to the frame with bolts and nuts that have built-in lock washer. The mechanism uses a fully reclining, independent breakaway back position.
- Special Order Customization Available
|Dimensions||38"W x 38"D x 40"H|
|Shipping Weight||80 lbs.|
|Inside Seat Dimensions||22.5"W x 22.5"D x 40"H|
|Wall Proximity To Allow Full Recline||18.5 inches|
|Dimensions When Fully Reclined (Headrest to Footrest)||64 inches|
|Weight Capacity||300 lbs.|
|Country of Origin||USA|
|Care Instructions||Clean with Water-Based Shampoo or Cleaner|
More from the Thorne collection
- Springs with Limited Lifetime Parts & 1-Year Labor Warranty
- Frame with Limited Lifetime Parts & 1-Year Labor Warranty
- Cushion with 1-Year Parts & Labor Warranty
- iClean Fabric with 3-Year Parts & 1-Year Labor Warranty
- Mechanism with Limited Lifetime Parts & 1-Year Labor Warranty