Heather Cream High Leg Recliner - Thorne - 74999
Heather Cream High Leg Recliner - Thorne
La-Z-Boy 29-492/G151589/FN021 SKU: 110797922
74999 Only In Stores
Warning! Available in Utah and Las Vegas Stores Only
|Shipping: Not Available|
Pick it up Today at Las Vegas Warehouse, Nevada - NDC
This Heather cream high leg recliner from RC Willey was inspired by the wingback chair. The Thorne takes a traditional style and makes it its own. Sans wings. This high-leg recliner flaunts a handsome button-tufted back, simple, flared, rolled arms and tapered legs. And it gets along with all sorts of furniture groupings.
- Button-Tufted Back
- Decorative Wood Legs
- Welt Trim
- Padded Outside Arms and Back
- Performance Plush HR foam Seat cushion, Loose Seat
The SEAT features four 8-gauge seat springs with rear swing anchors, two 12-gauge cross brace wires and a deck pad. The BACK uses two 12-gauge springs and a spring cover.
Frames consist of kiln-dried hardwood, furniture grade laminated or engineered framing material, or a combination of these products. Frame joints are double doweled or lap-jointed and glued; stress points are reinforced with corner blocks. Arm frame is reinforced with customer designed metal bracket and reinforced with a 2 1/2" glue block to provide maximum stability and strength.
The loose SEAT cushion contains a " contour cut polurethane foam core laminated with a 1" layer of polyurethane foam and laminated with a layer of bonded polyester batting wrap. The seat cushion fits under the inside back. The tight BACK contains a 3" contour cut polyurethane foam core laminated with a 2" layer of polyurethane foam, laminated with a 3" layer of polyurethane foam and laminated with a layer of bonded polyester batting wrap. The outside back is padded with a 3/*' layer of polyurethane foam. The ARMS are padded with a 2" contour cut polyurethane foam core and wrapped with a 1/2" layer of polyurethane foam. The outside arm is padded with a 3/8" layer of polyurethane foam pad. The inside arm and front post are sewn together. The LEGREST contains a 3/4" polyurethane foam core, a 1/2" layer of polyurethane foam and wrapped with a 1/2" layer of polyurethane foam. The FOOTREST contains a 1/2" polyurethane foam core and wrapped with a 1/2" layer of polyurethane foam.
The High Leg Lounger chair utilizes an easy-to-operate non-handle, 3 way mechanism. The reclining fixture is attached to the frame with bolts and nuts that have built-in lock washer. The mechanism uses a fully reclining, independent breakaway back position.
|Dimensions||38"W x 38"D x 40"H|
|Shipping Weight||80 lbs.|
|Inside Seat Dimensions||22.5"W x 22.5"D x 40"H|
|Wall Proximity To Allow Full Recline||18.5 inches|
|Dimensions When Fully Reclined (Headrest to Footrest)||64 inches|
|Weight Capacity||300 lbs.|
|Country of Origin||USA|
|Care Instructions||Clean with Water-Based Shampoo or Cleaner|
Warranties & Add-Ons
- Springs with Limited Lifetime Parts & 1-Year Labor Warranty
- Frame with Limited Lifetime Parts & 1-Year Labor Warranty
- Cushion with 1-Year Parts & Labor Warranty
- iClean Fabric with 3-Year Parts & 1-Year Labor Warranty
- Mechanism with Limited Lifetime Parts & 1-Year Labor Warranty