Coffee Low Profile Power Recliner - Midtown - 99999
Coffee Low Profile Power Recliner - Midtown
|Shipping: Not Available|
Sold out in your area
|Special Orders: Special Order Customization Available|
The Midtown low profile power recliner, now at RC Willey is clean, simple, modern and fabulous. Not to mention it’s a nice fit for both compact and more crowded spaces. It also flaunts a tight back, loose box border seat and slightly curved low profile track arms accented in welt trim. But perhaps most important, it lets you recline with minimal effort. You’re welcome.
The seat features four 8-gauge seat springs with a Morley spring system, dimpled rear swing anchors, and two 12-gauge cross brace wires. A deck pad and nonwoven spring cover are used over the springs. The BACK uses three 12-gauge springs.
Frames consist of kiln-dried hardwood, furniture grade laminates or engineered framing material or a combination of these products. Frame joints are double-dowelled or lap-jointed and glued; stress points are reinforced with corner blocks and/or metal fasteners.
The loose seat cushion contains a 5" polyurethane foam core with a 1" polyurethane foam topper, and wrapped with bonded polyester batting. The seat cushion fits flush with the inside back. The tight back cushion contains a 3 1/2" contour cut polyurethane foam core, with a 1/2" layer of polyurethane foam, a 3 1/2" polyurethane foam lower filler, a 1/2" polyurethane foam upper filler, and is wrapped with a layer of bonded polyester batting. The arms contain a 1/2" contour cut polyurethane foam core with a 1/2" layer of polyurethane foam wrap. The inside arm, outside arm and front post are sewn together. The LEGREST contains a 3" contour cut polyurethane foam core.
The low leg lounger chair utilizes an easy-to-operate non-handle, 3 way mechanism. The reclining fixture is attached to the frame with bolts and nuts that have built-in lock washers. The mechanism uses a full reclining, independent breakaway back position.
The power recline mechanism uses a single 24-volt DC motor to quickly and smoothly operate each reclining unit. A conventional power touch button controls the legrest and back motion, allowing the user to stop when a comfortable position is reached. The power units include a new breakaway legrest safety feature. If the legrest encounters an obstruction while closing the legrest will disengage, or breakaway, from the mechanism. Simply push the legrest closed with your legs to reconnect the legrest to the mechanism. The power recline transformer has a battery backup hidden underneath. Two 9-volt batteries will return the unit from a fully reclined position to an upright seated position with a single occupant, not to exceed 300 pounds. The no-oil rivet mechanism design provides smooth, quiet and maintenance-free operation.
- Power recliner
- Decorative wood legs
- Welt trim on back, arms and seat
- Silver two-toned button outside mounted with USB
- Loose seat
- Tight back
- Special Order Customization Available
|Dimensions||33.5"W x 38"D x 39.5"H|
|Shipping Weight||107 lbs.|
|Inside Seat Dimensions||23.5"W x 21"D x 20.5"H|
|Wall Proximity To Allow Full Recline||18.5 inches|
|Dimensions When Fully Reclined (Headrest to Footrest)||64 inches|
|Weight Capacity||Tested to 300 lbs.|
|Country of Origin||USA|
|Special Order||Additional options available by special order. See store for details.|
|Care Instructions||Clean with water-free dry cleaning solvent|
|Number of Power Cords||1|
- 8 and 12 Gauge Springs with Limited Lifetime Parts & 1-Year Labor Warranty
- Frame with Limited Lifetime Parts & 1-Year Labor Warranty
- Cushion with 1-Year Parts & Labor Warranty
- Fabric with 1-Year Parts & Labor Warranty
- La-Z-Boy Mechanism with Limited Lifetime Parts & 1-Year Labor Warranty
- 24v DC Motor Electronics with 3-Year Parts & 1-Year Labor Warranty