Gray Reclina-Way Full Power Reclining Loveseat - Forum

• Polyurethane Foam
• Chaise Seat and Foostrest
• Single-Needle Topstitching Backs, Seat and Arms
• Springs
  The SEAT features four 8 1/2-gauge seat springs with rear helical springs and two 12-gauge cross brace wires. An insulator/stabilizer spring support system, a deck pad and a nonwoven spring cover are integrated into the seat cushion assembly. The BACK uses two 7 1/2-gauge springs. The ROCKER SPRING uses La-Z-Boy's standard 8-gauge dual spring and must pass the minimum half million cycle test.
• Frame
  Frames consist of kiln-dried hardwood, furniture grade laminates or engineered framing material, or a combination of these products. Frame joints are mortis and tenon or lap-jointed and glued; stress points are reinforced with corner blocks.
• Cushion
  The rear section of the standard depth standard SEAT construction chaise seat contains a 3 1/2" contour cut polyurethane foam core. The chaise pad contains a 1 3/4" polyurethane foam core and extends from the front of the seat to the top of the legrest. The semi-attached upper BACK pillow contains a 4 3/4" polyurethane foam core, a 1" layer of laminated polyurethane foam and laminated layer of polyester batting wrap. The two middle back secions contains each contain a 4" polyurethane foam core, a 1/2" layer of polyurethane foam laminated to the core and a laminated layer of polyester batting wrap. The lower back contains a 4 1/2" contour cut polyurethane foam core, a 1" laminated layer of polyurethane foam and a laminated layer of polyester batting wrap. The ARMS are padded with a 2 1/4" contour cut polyurethane foam core and a 1" layer of polyurethane foam. The inside arm, outside arm and front post are sewn together. The chaise LEGREST contains a 3/4" polyurethane foam core. The chaise pad for the legrest contains a 2" contour cut polyurethane foam core.
• Mechanism
  Mechanical parts are tested to surpass 100,00 cycles, which equals 50 years of normal use. Features customized reclining comfort which accommodates the size and weight of each user with the turn of a special, easy-to-reach wing-nut. Easy-acting comfort selector to choose among three legrest setting. Mechanism are manufactured in-house by La-Z-Boy.
• Electronics
  The power recline mechanism uses a single 24-volt DC motor to quickly and smoothly operate each reclining unit. A convenient power touch button controls the legrest and back motion, allowing the user to stop when a comfortable position is reached. The power units include a new breakaway legrest safety feature. If the legrest encounters an obstruction while closing the legress will disengage, or breakaway, from the mechanism. Simply push the legrest closed with your legs to reconnect the legrest to the mechanism. The power recline transformer has a battery backup hidden underneath. Two 9-volt batteries will return the unit from a fully reclined position to an upright seated position with a single occupant, not to exceed 300 pounds. The no-oil rivet mechanism design provides smooth, quiet and maintenance free operation.

Manufacturer Warranties

• Springs with Limited Lifetime Parts and 1-Year Labor Warranty
• Frame with Limited Lifetime Parts and 1-Year Labor Warranty
• Cushion with 1-Year Parts and Labor Warranty
• Fabric with 1-Year Parts and Labor Warranty
• Mechanism with Limited Lifetime Parts and 1-Year Labor Warranty
• Electronics with 3-Year Parts and 1-Year Labor Warranty