Ash Gray duo 2 Seat Power Reclining Sofa - Edie

Seat

Each seat features seven 8-gauge seat springs with two 12-gauge cross brace wires and a nonwoven spring cover. The sofa back uses eight 10-gauge springs with two 16-gauge cross brace wires.

Frame

Frames consist of kiln-dried hardwood, furniture grade laminates or engineered framing material or a combination of these products. Frame joints are double-dowelled or lap-jointed and glued; stress points are reinforced with corner blocks and/or metal fasteners.

Cushion

The unique seat cushions contain a 3" polyurethane foam core with different levels of firmness, to provide more support in the rear core and less in the front. The core is topped with a 2" polyurethane foam topper and two 1" polyurethane foam toppers, one on top of the core and one on the bottom of the core. The polyurethane seat assembly is then laminated with a bonded polyester batting wrap. The attached seat cushions fit flush with the inside back. The semi-attached back cushions each contain an inner bag filled with blown fiber. The arms are padded with a 2" polyurethane foam core, a 1/2" polyurethane foam arm wrap and a 1/2" polyurethane foam arm filler. The inside arm, outside arm and front post are sewn together. The front rail is padded with a 1/2" polyurethane foam core and a 1/2" layer of polyurethane foam.

Mechanism

The gravity-based, dual stage motion mechanism features superior built-in weight balance and ease of operation. The trigger activator effortlessly releases the legrest to a fully extended position, while the enhanced design provides firm support of the extended legrest and easier retraction. Features adjustable reclining tension wing nuts to customize the motion of the back and seat. The reclining tension wing-nuts are located toward the front of the mechanism, underneath the seat. Select one of the three legrest tension settings with the legrest tension adjustment wheels located toward the front of the mechanism, underneath the seat. The exclusive pre-recline back feature allows partial recline of the back without extending the legrest. The no-oil rivet mechanism design provides smooth, quiet and maintenance-free operation.

Electronics

The power recline mechanism uses a single 24-volt DC motor to quickly and smoothly operate each reclining unit. A convenient power touch button controls the legrest and back motion, allowing the user to stop when a comfortable position is reached. The power units include a breakaway legrest safety feature. If the legrest encounters an obstruction while closing the legrest will disengage, or breakaway, from the mechanism. Simply push the legrest closed with your legs to reconnect the legrest to the mechanism. The power recline transformer has a battery backup hidden underneath. Two 9-volt batteries will return the unit from a fully reclined position to an upright seated position with a single occupant, not to exceed 300 pounds. The no-oil rivet mechanism design provides smooth, quiet and maintenance-free operation.