Cream and Black High Leg Recliner - Thorne
La-Z-Boy Cream and Black High Leg Recliner - Thorne
|Shipping: Not Available|
Free Store Pickup:
Sold out in your area
Inspired by the wingback chair, this Thorne black and cream high leg recliner, now at RC Willey, takes a traditional style and makes it its own.Sans wings. This high-leg recliner flaunts a handsome button-tufted back, simple, flared, rolled arms and tapered legs. And it gets along with all sorts of furniture groupings.
The seat features four 8-gauge seat springs with rear swing anchors, two 12-gauge cross brace wires and a deck pad. The back uses two 12-gauge springs and a spring cover.
Frames consist of kiln-dried hardwood, furniture grade laminated or engineered framing material, or a combination of these products. Frame joints are double dowelled or lap-jointed and glued; stress points are reinforced with corner blocks. Arm frame is reinforced with customer designed metal bracket and reinforced with a 2 1/2" glue block to provide maximum stability and strength.
The loose seat cushion contains a contour cut polyurethane foam core laminated with a 1" layer of polyurethane foam and laminated with a layer of bonded polyester batting wrap. The seat cushion fits under the inside back. The tight back contains a 3" contour cut polyurethane foam core laminated with a 2" layer of polyurethane foam, laminated with a 3" layer of polyurethane foam and laminated with a layer of bonded polyester batting wrap. The outside back is padded with a 3" layer of polyurethane foam. The arms are padded with a 2" contour cut polyurethane foam core and wrapped with a 1/2" layer of polyurethane foam. The outside arm is padded with a 3/8" layer of polyurethane foam pad. The inside arm and front post are sewn together. The legrest contains a 3/4" polyurethane foam core, a 1/2" layer of polyurethane foam and wrapped with a 1/2" layer of polyurethane foam. The footrest contains a 1/2" polyurethane foam core and wrapped with a 1/2" layer of polyurethane foam.
The High Leg Lounger chair utilizes an easy-to-operate non-handle, 3 way mechanism. The reclining fixture is attached to the frame with bolts and nuts that have built-in lock washer. The mechanism uses a fully reclining, independent breakaway back position.
- Button-tufted Back
- Decorative Wood Legs
- Welt Trim
- Padded outside arms and back
- Performance Plush HR foam Seat cushion, Loose Seat
|Dimensions||38"W x 38"D x 40"H|
|Shipping Weight||80 lbs.|
|Inside Seat Dimensions||22.5"W x 22.5"D x 20"H|
|Wall Proximity To Allow Full Recline||18.5 inches|
|Country of Origin||USA|
|Care Instructions||Clean with Water-based Shampoo Or Cleaner|
- Springs with Limited Lifetime Parts & 1-Year Labor Warranty
- Kiln Dried Solid Wood Frame with Limited Lifetime Parts & 1-Year Labor Warranty
- Cushion with 1-Year Parts & Labor Warranty
- i-Clean Fabric with 3-Year Parts & 1-Year Labor Warranty
- Mechanism with 3-Year Parts & 1-Year Labor Warranty