Mocha Traditional Manual Rocker Recliner - Lancer
La-Z-Boy Mocha Traditional Manual Rocker Recliner - Lancer
Price Reflects Coupon Savings
|Shipping: Not Available|
Free Store Pickup:
Sold out in your area
|Special Orders: Special Order Customization Available|
When it's time to kick back and relax, the Lancer Mocha traditional manual rocker recliner raises the bar...as well as your feet. An updated look that’s at home just about anywhere with clean lines, pillow-padded arms, channel-stitched back and chaise seat for added leg support.
The seat features four 8 1/2-gauge seat springs with rear helical springs and two 12-gauge cross brace wires. An insulator/stabilizer spring support system, a deck pad, and a nonwoven spring cover are integrated into the seat cushion for exceptional support. The back uses three 12-gauge springs with a spring cover. The back uses three 12-gauge springs with a spring cover. The rocker spring uses La-Z-Boy's standard 8-gauge dual spring and must pass the minimum half million cycle test.
The frame consists of kiln-dried hardwood, furniture grade laminates or engineered framing material, or a combination of these products. Frame joints are mortise and tenon or lap-jointed and glued; stress points are reinforced with corner blocks. The rocker recliner includes a grade construction consisting of precision-profiled hardwood that is double-dowelled, glued and reinforced with screws into the body side.
The rear section of the chaise seat contains 3 1/2" of polyurethane foam and the front section of the chaise seat contains 2 1/4" of polyurethane foam. The chaise pad contains a 1 3/4" polyurethane foam core. The upper and lower back each contain an inner bag filled with blown fiber. The arms consist of a 3" contour cut polyurethane foam core. The footrest contains a 1/2" polyurethane foam wrap and the pad contains a 1 3/4" polyurethane core.
La-Z-Boy mechanical parts are tested to surpass 100,000 cycles, which equals 50 years of normal use. Each rocker features customized reclining comfort which accommodates the size and weight of each user with the turn of a special, easy-to-reach wing-nut. Mechanisms are engineered and manufactured in-house by La-Z-Boy.
- Blown fiber back
- Standard chaise seat and footrest
- Special Order Customization Available
|Dimensions||37"W x 40"D x 41.5"H|
|Shipping Weight||93 lbs.|
|Care Instructions||Clean with Water-free Dry Cleaning Solvent|
|Inside Seat Dimensions||20.5"W x 20.5"D x 19"H|
|Wall Proximity To Allow Full Recline||11.5 inches|
|Dimensions When Fully Reclined (Headrest to Footrest)||73 inches|
|Weight Capacity||Tested to 300 lbs.|
|Country of Origin||USA|
More from the Lancer collection
- 8 & 12 Gauge Springs with Limited Lifetime Parts & 1-Year Labor Warranty
- Kiln-Dried Hardwood Frame with Limited Lifetime Parts & 1-Year Labor Warranty
- Cushion with 1-Year Parts & Labor Warranty
- Fabric with 1-Year Parts & Labor Warranty
- La-Z-Boy Mechanism with Limited Lifetime Parts & 1-Year Labor Warranty
- Electronics with 3-Year Parts & 1-Year Labor Warranty
- 111465575 :0
- 111466342 :0
- 3360083 :0